Hisense 2.5HP [AN25DBG] R32 Standard Non-Inverter Air Con (DB Series)

Hisense 2.5HP R32 Standard Non-Inverter Air Con (DB) [AN25DBG]

Features :

• – Horsepower : 2.5 HP
• – Non-Inverter Technology
• – Rotary Compressor
• – LED Temperature Display
• – Fast Cooling
• – Large Blade, Long Air Distance
• – I Feel (uniform temperature) : room temperature is recorded by the sensor in the remote control, more accurate temperature reading
• – 100 % Pure Copper Pipes : higher temperature and pressure resistance, better weldability
• – Anti-Corrosion Gold Fin
• – 24 Hours Timer
• – 3 Speed and Auto Indoor Fan Control
• – Vertical Auto Swing Louver
• – Sleep Mode : automatically set to an ambient temperature during sleeping time
• – Smart Function : auto adjust to the best mode according to the room temperature
• – Super Function
• – Auto Restart
• – Dimmer
• – 2 Ways Draining : Yes, Left and Right
• – Ionizer Filter : inhibit bacteria, pollen, and mold species
• – Long Piping : 25 m (Maximum)
• – Handheld LCD Wireless Remote Controller
• – Removable and Washable Panel
• – Washable PP Filter
• – Double Fireproof Design : control boards of the air conditioners are covered by fireproof coating and put into closed metal shell
• – 3 Star Energy Efficiency
• – Warranty (Online registration within 14 days from the date of purchase)
  • – 2 years general warranty
  • – 5 years compressor warranty
  • – Online warranty registration website : https://www.hisense.com.my/online-registration/

Specifications :

• – Cooling Capacity (Btu/h) : 22000 Btu/h
• – Energy Efficiency Ratio, EER (W / W) : 2.95
• – Voltage (V) : 220 V – 240 V
• – Frequency (Hz) : 50 Hz
• – Phase : 1P
• – Current (A) : 9.2 A (Cooling)
• – Rated Input (W) : 2186 W (Cooling)
• – Locked Rotor Amperage, LRA (A) : 48 A
• – Degree of Protection (In / Out) (IP) : IPX0 / IPX4
• – Air Circulation : 1200 m ³ / hour
• – Indoor Unit Noise Level (H / L ) : 45 / 36 dB (A)
• – Outdoor Unit Noise Level (H) : 56 dB (A)
• – Refrigerant Type : R32
• – Refrigerant Amount : 1250g
• – Average Energy Consumption / Year (kWh) : 3325 kWh

Product Dimensions and Weight :

• Indoor Unit
  • – Dimensions (W x H x D) (mm) : 1100 mm x 325 mm x 244 mm
  • – Net Weight : 14.5 kg
  • – Gross Weight : 17.0 kg
• Outdoor Unit
  • – Dimensions (W x H x D) (mm) : 860 mm x 650 mm x 310 mm
  • – Net Weight : 45.0 kg
  • – Gross Weight : 49.0 kg
• Refrigerant Pipe Diameter
  • – Liquid Pipe (inch) : 3/8 inch
  • – Gas Pipe (inch) : 5/8 inch
• Pipe Extension
  • – Maximum Pipe Length (m) : 25 m
  • – Maximum Height Interval (m) : 10 m

Note :

• – Please read the air conditioner’s user manual carefully before installing the unit and before using and operating this air conditioner.​
  • – Visit the following website for this air conditioner’s user manual booklet at https://www.hisense.com.my/wp-content/uploads/2022/10/Hisense-AC-user-manual.pdf
• – Do not install this appliance in the laundry area.
• – Installation of this appliance must be carried out by experienced service technicians and installers.
• – For models using R32 refrigerant, piping connection should be conducted outdoors.
• – Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
• – When charging refrigerant into the system, make sure to charge in liquid state.
• – Check the connecting cables and pipes carefully, make sure they are correct and firm before connecting the power of the air conditioner.
• – Keep the interconnection cable away from the copper tube.
• – There must be an air-break switch.
• – The maximum length of the connecting pipe between the indoor unit and outdoor unit should be less than 5 meters.
• – Children cannot play with this appliance.
• – Disconnect all remote electric power supplies before servicing the air conditioner.
• – Servicing shall only be performed as recommended by the equipment manufacturer.
• – Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of a trained person.
• – If the supply cord is damaged, the supply cord must be replaced by the manufacturer, service agent or similarly trained persons.